| E000 |
0000 |
Fixing temperature abnormal rise |
| E001 |
0000 |
Fixing unit temperature rise detection (by main thermistor) |
| 0001 |
Fixing unit temperature rise detection (by sub thermistor) |
| E002 |
0000 |
Fixing unit temperature insufficient rise |
| E003 |
0000 |
Low fixing temperature detection after standby (by main thermistor) |
| 0001 |
Low fixing temperature detection after standby (by sub thermistor) |
| E007 |
0000 |
Fixing film rotation error |
| E010 |
0000 |
Main motor rotation error |
| E019 |
0001 |
Waste toner full detection |
| 0002 |
Waster toner full detection sensor failure |
| E052 |
0000 |
Duplex unit connection error |
| E100 |
0000 |
BD cycle out of range |
| E197 |
0000 |
Erroneous communication with printer engine |
| E500 |
0001 |
Finisher communication error |
| E520 |
0000 |
Offset error |
| E531 |
0000 |
Stapling error |
| E540 |
0001 |
Paper surface not detected (standard tray) |
| 0002 |
Not moved within the specified time (standard tray) |
| 0003 |
Sensor not reached within 3 seconds (standard tray) |
| 0005 |
Encoder clock failure (standard tray) |
| E542 |
0001 |
Paper surface not detected (optional tray) |
| 0002 |
Not moved within the specified time (optional tray) |
| 0003 |
Sensor not reached within 3 seconds (optional tray) |
| 0005 |
Encoder clock failure (optional tray) |
| E575 |
0000 |
Stack delivery error |
| E584 |
0000 |
Shutter failure |
| E716 |
0000 |
Erroneous communication with optional cassette |
| E719 |
0000 |
Erroneous communication with card reader (serial communication) |
| 0002 |
Erroneous communication with coin vender (serial communication) |
| E733 |
0000 |
Erroneous communication between controller and printer |
| E736 |
0000 |
CCU communication error |
| E739 |
0000 |
Erroneous communication between controller and network board |
| E744 |
0001 |
Language file/boot ROM/USB memory error |
| 0002 |
| 0003 |
| 0004 |
| E805 |
0000 |
Fan failure |
| E808 |
0000 |
Fixing drive circuit failure |
